ABCU-5710RZ / ABCU-5700RZ 1000BASE-T 1.25 GBd Small Form Pluggable Low Voltage (3.3 V) Electrical Transceiver over Category 5 Cable

Description

The ABCU-5710RZ and ABCU-5700RZ electrical transceivers from Avago Technologies offer full-duplex throughput of 1000 Mbps by transporting data over shielded and unshielded twisted pair category 5 cable with 5-level PAM (Pulse Amplitude Modulation) signals.The ABCU-5710RZ and ABCU-5700RZ differ only in handling of RX_LOS signal functions, as explained further on the following pages.

The Avago Technologies 1000BASE-T module takes signals from both the twisted pair category 5 cable and the SerDes interface. Pin count overhead between the

MAC and the PHY is minimized, and Gigabit Ethernet operation is achieved with maximum space savings.

Module Diagrams

Figure 1 illustrates the major functional components of the ABCU-5700/5710RZ. The 20-pin connection diagram of module printed circuit board of the module is shown in Figure 2. Figure 3 depicts the pin assignment

of the MDI (RJ45 jack). Figure 6 depicts the external configuration and dimensions of the module.

Features

• RoHS-6 Compliant (see Table 1)

• Designed for Industry-Standard, MSA Compliant Small Form Factor Pluggable (SFP) Ports

• Compatible with IEEE 802.3:2000

• Custom RJ-45 connector with integrated magnetics

• Link lengths at 1.25 Gbd: up to 100 m per IEEE802.3

• Low power, high performance 1.25 Gbd SerDes integrated in module

• Single +3.3 V power supply operation

• Auto-negotiation per IEEE 802.3:2000 Clause 28 (Twisted Pair) and Clause 37 (1000BASE-X)

• Compatible to both shielded and unshielded twisted pair category 5 cable

• Two configurations:

       ABCU-5700RZ: RX_LOS enabled

       ABCU-5710RZ: RX_LOS disabled

• Rated for Commercial Temperature application

     0 to +70°C(Commercial)

    -40°C to +85°C (Industrial)

Applications

• Switch to switch interface

• Switched backplane applications

• File server interface

Related Products

• AFBR-5710Z: Family of 850nm +3.3V SFP optical

transceivers for Gigabit Ethernet

• AFCT-5710Z: Family of 1310nm +3.3V SFP optical

transceivers for Gigabit Ethernet

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.