Meets InfiniBand NDR end-to-end system requirements

Built-in Marvell 6nm DSP chip, maximum power consumption is 10W

Low Bit Error Rate (BER) for InfiniBand NDR systems

Supports 800G to 2×400G link connections between switch and network adapter

4×106.25G PAM4 retimed 400GAUI-4 electrical interface

Hot-pluggable QSFP112 package form factor

Complies with QSFP-112 MSA, CMIS Rev. 4.0, IEEE 802.3cu standards and Class 1 laser safety

Complies with high-speed electrical port standards

Verified on real hardware to ensure full compatibility with NVIDIA ConnectX-7 network adapter

Meets InfiniBand NDR end-to-end system requirements

Built-in Macom chip, maximum power consumption is 10W

Supports 800G to 2×400G link connections between switch and network adapter

Supports 1/2-rate configuration for 200G (2×100G)

Converts 4×106.25G PAM4 electrical signals to 400GAUI-4 electrical signals for parallel transmission

Complies with the hot-pluggable QSFP112 standard

Complies with QSFP-112 MSA, CMIS Rev. 5.0, IEEE 802.3ck standards and Class 1 laser safety

Verified on real hardware to ensure full compatibility with NVIDIA ConnectX-7 network adapter

Meets InfiniBand NDR end-to-end system requirements

Built-in Broadcom 7nm DSP chip, maximum power consumption 10W

Flat-top OSFP optical transceiver is compatible with ConnectX-7 HCA

Supports 800G to 2×400G links between switch and network adapter

Converts 4×100G-PAM4 electrical signals to 4×100G-PAM4 optical signals for parallel transmission

Verified on real hardware to ensure full compatibility with NVIDIA ConnectX-7 HCA

Compliant with OSFP MSA, IEEE 802.3ck standards and Class 1 laser safety, supports DDM (Digital Diagnostic Monitoring)

Meets InfiniBand NDR end-to-end system requirements

Meets InfiniBand NDR end-to-end system requirements; built-in Broadcom 7nm chip, maximum power consumption 10W

Supports 800G to 2×400G link connections between switch and network adapter

Supports 1/2-rate configuration for 2×200G

Converts 4×106.25G PAM4 electrical signals to 400GAUI-4 electrical signals for parallel transmission

Complies with hot-pluggable QSFP112 standard

Complies with QSFP-112 MSA, CMIS Rev. 5.0, IEEE 802.3ck standards and Class 1 laser safety

Verified on real hardware to ensure full compatibility with NVIDIA ConnectX-7 network adapter

Meets InfiniBand NDR end-to-end system requirements

Built-in 7nm DSP, maximum power consumption 8.5W

InfiniBand NDR system features low bit error rate (BER)

Flat-top OSFP optical transceiver is compatible with ConnectX-7 HCA

Supports 800G to 2×400G network interface card (NIC) link connections

Converts 4×100G-PAM4 electrical signals to 4×100G-PAM4 optical signals for parallel transmission

Fully tested and fully compatible with NVIDIA ConnectX-7 HCA

Compliant with OSFP MSA, IEEE 802.3ck, RoHS and Class 1 laser safety, supports DDM (Digital Diagnostic Monitoring)

Complies with InfiniBand NDR end-to-end system requirements

Built-in Marvell 6nm chip, maximum power consumption 10W

Delivers ultra-low Bit Error Rate (BER) for FS InfiniBand NDR systems

Supports 800G to 2x400G link connections from switches to NICs

Converts 4 channels of 106.25G PAM4 electrical signals to 400GAUI-4 electrical signals for parallel transmission

Complies with hot-pluggable QSFP112 standard

Complies with QSFP-112 MSA, CMIS Rev 5.2, IEEE 802.3bs standards and Class 1 Laser Safety